INSTRUCTIONS: Setting Time and Syncing Analog and Digital Displays on the F1 Kirium and Aquaracer Chronotimer

While setting and adjusting the digital display on the F1 Kirium and the Chronotimer is intuitive, I always struggle to remember how to adjust the hands and I can never be bothered to search through the mountain of watch boxes to find the manuals.

1. Rotate the crown until the T1 time is showing in the display.

2. Pull the crown out to the '2' position* 

3. Pressing the top pusher changes the display between 12hr and 24hr

4. Press the lower pusher to switch between hours, minutes and seconds on the 

digital display, turning the crown to set each individually.

5. Press the crown back in.

6. Rotate the crown until the 'neutral' display appears (ie. no
digital time visible)

7. Pull out the crown, the letter 'R' will appear

8. Press button 'B' (the lower one), the time will appear and start flashing

9. Rotate the crown to adjust the analog time until the analog time
matches the displayed digital time for all three hands, then press the
crown back in.

*Crown positions: 0 - pressed in, 1 - standard, 2 - pulled out

To set the date...

Select the day/date function and pull the crown out to position 2

Briefly press the top pusher to select date display mode (D/M or M/D)

The date. month and year is changed by rotating the crown.

Briefly press the bottom pusher to confirm your selection