BUYING EXPERIENCE: TAG Heuer Rubber Strap BT0702

BT0702

It's nearly three years since I bought the BT0702 rubber strap for the first time, then for my black dial 2000 Series which I subsequently sold (along with the rubber strap) because I felt the case size was too small for my wrist and didn't expect to replace it (the BT0702 is specific to the 2000 case). So consequently, when I bought my 2000 Series Multigraph I should probably have realised that I was going to have the same old problems with the bracelet that led me to buy the rubber strap the first time around.

But of course, I didn't. It was a triumph of optimism over experience and consequently I ended up having to re-order the BT0702 as I literally could not wear my Mutligraph without chewing up my wrist. Believe me I tried to get on with the clasp, I even went as far as filing down the sharp edges that sat lower than the main section of the clasp, but it was no good; my wrist would not stand it and so I had to get this strap all over again.

It only took a couple of weeks to come in to the Bicester store and I scooted over one night after work to get it fitted. It's not the easiest of straps to fit by all accounts but Sophie (who is quite charming to talk to by the way) got there in the end and it looks great to me. I don't remember it smelling of vanilla last time and on first acquaintance it was a bit overpowering (actually it gave me a bit of a headache!) but it quickly settled down to a more subtle scent and after a couple of days it was much less noticeable.

Initially I thought the watch looked slightly better on the bracelet, but it still looks good on the rubber strap and the comfort and wearability is night and day better. I really enjoyed wearing this strap the first time round and it's nice to have it back in the collection again, and actually the more I wear it the more I'm starting to think maybe I prefer it this way after all... 

The BT0702 costs £135, which is perhaps quite a lot for a fairly simple strap, but I'm not really into fitting aftermarket straps to my watches, I'd much prefer to keep my entire collection 100% pure TAG Heuer, so it's worth it to me. It's nicely made; the buckle and pin are nicely manufactured and the strap has four (count 'em) TAG Heuer logos on it. I really like that, I get that some people might not but they are all pretty subtle, this is no 'in your face' Breitling rubber strap that's for sure!

Honestly I wish I could have got on with the bracelet, because I think it looks neat and it would have been nice to have the choice, but I can definitely live with this rubber strap and it's been a blessing in the stupidly warm weather we've been having recently.

FEATURE: TAG Heuer Straps

Watch companies spend a lot of time and money refining their designs and getting the look just right, but one element of watch design that is perhaps slightly overlooked is that of getting the right strap. True some straps are interchangeable, but some are not and say you like a watch but don't like the strap, it might be worth checking your options before you put down your hard earned cash. The casual observer might think that watch companies just design their watches and then stick them on whatever strap they have lying around, but that is clearly wide of the mark.

WAY211A.FT6068

Some straps are specifically designed to suit certain models and may be unsuitable for use with other watches. The Aquaracer above is a perfect example, as the rubber strap is specially designed to leave no gaps around the spring bars. Sure you probably can fit any old black rubber strap, but it will never look this good. The choice of strap for your watch can have a huge difference on the overall look as well, compare the image below with the earlier photo of the WAY211A Aquaracer.

WAY211A.BA0928

The bracelet gives the watch a completely different feel. Aside from making it more dressy, the bracelet seems to subdue the yellow highlights on the dial, whereas the yellow edging on the rubber strap compliments and brings out the colour detail on the dial.

The right strap can transform a watch. I really like the Monza 40th Anniversary watch, but I loathe the strap it comes on. I know it's a 'retro' piece (although with it's black coating and red and white markings it looks thoroughly modern to me) but that 'racing' strap with the holes in is just hideous, I'd much prefer to buy it on a rubber tyre-tread strap (or even a plain rubber). 

CR2080.FC6375                        CR2080.FT6042*

Unfortunately the CR2080.FT6042 isn't available (at least not yet...maybe if Mr Biver reads my blog?) but it just shows how important the right strap is for a watch and how much it can change the overall aesthetic.

Currently the TAG Heuer range generally includes four types of straps: Steel, leather/aligator, rubber and nylon. The last is the newest addition to the range and I have to say I am not a fan. I've tried a watch on with the new straps and not only do they look a bit odd but they look kind of cheap as well, which is not what I want when I'm spending thousands of pounds on a watch. 

Here's a few examples...

WAY208C.FC6383    WAY208A.FC6381    WAY208B.FC6382

Wow, so much wrongness in this picture it's hard to know where to start. Actually, having said that, the WAY208C is another perfect example of a watch which looks much better on a different strap, and the blue one is so wrong, that part of me actually likes it. I mean that nylon strap has to go, but the crazy blue markings bring to mind those Christmas lights that everyone has these days which make your eyes go funny if you look at them for more then three seconds. Honestly, if that watch wasn't so expensive I think I'd buy one, but for £2100 it's just too much for such a crazy looking piece.

See, doesn't that look sooo much better? I mean I personally don't like the holes in that black rubber strap, but the potential is obvious. Suddenly the actual watch looks killer and the beige markings look great. It's a similar story here too, where I've manipulated the image of this brand new Carrera model to show you what it looks like with the original distressed leather strap and again the tyre-tread rubber strap from the Senna Carrera.

CV2A84.FC6394                       CV2A84.FT6042*

I really like that, and I think I would seriously consider buying that if TAG were to make it, and failing that, since they are both Carreras, it's a safe bet to assume that the FT6042 strap would fit if you were to purchase it separately. 

Which brings us to a slightly perilous area of TAG Heuer ownership, replacement straps. I've now bought two official TAG rubber straps from ADs, first the BT0702 for the 2000 Series WK1110, and secondly the BT0704 strap for my WAH1110-0. The BT0704 was a very reasonable £45, but the BT0702 was a somewhat eye watering £140... I still can't for the life of me figure out the justification for the difference in price. Both are essentially rubber straps with a steel buckle, if anything the cheaper strap has more detailing and looks better quality.

What you mustn't do, under any circumstances is buy your TAG strap from eBay (or even other internet sites) without checking the prices first with your AD. When I was looking to get the BT0702 I Googled it and found prices anywhere from £200 - £350, which was probably why when my AD told me it was £140 I thought it was actually quite reasonable! 

Similarly, when I was after the BT0704 I found it from about £85 - £150. So it's clear that there's a lot of scoundrels out there looking to fleece the unwary buyer. And of course, buying from eBay can you be 100% sure that what you're buying is the real deal? Faking watches is one thing, faking straps must be a lot easier, and the potential earnings must be huge. Not to mention if you buy a rubber strap from eBay it could contain all sorts of noxious ingredients.

Though it was undoubtedly expensive, the BT0704 transformed the look of my WK1110 and was well worth the money, but my next potential strap purpose is not about aesthetics, but comfort and practicality.

CN211A.BA0353                      CN211A.FT8001

I do love my Aquagraph, but if there's one thing about it that annoys me it's the lack of adjustment on the bracelet. Simply put, there isn't any at all. All you can do is remove links (there is a half link), which is not very practical and makes life difficult in the summer or if your weight fluctuates a lot. So I'm seriously thinking about purchasing a rubber strap for it, I haven't tried my AD yet, but a quick Google suggests a price of £220, which is fairly horrendous and hopefully inflated! 

BT0701 Strap for the TAG Heuer Aquagraph

Seeing as the Aquagraph is a proper hardcore diving watch with a 500M rating and rubber covered chrono pushers, the rubber strap comes with a diving extension which is a bit of a waste because it will never be used and adds to the cost...but I suppose if that's how it comes then that's how it comes. I really need to get a proper price on this and see how it stacks up.

I've had mixed experiences of steel bracelets, on the one hand my F1 Kirium bracelet is absolutely top notch, so comfortable and so well made I can't imagine ever switching that to a rubber strap even though one is available (to be honest I don't think it looks anything like as good anyway, although that orange leather strap is beyond distressing!).

CL111A.BA0700     CL111A.FT6002     WL5210.FC6119

On the other hand, the bracelet/clasp on the older models I've owned annoyed the hell out of me, hence why I replaced with rubber. The older clasps in particular aren't terribly well designed and tend to have edges which while not exactly 'sharp' are pronounced enough to annoy your wrist. Mind you this problem can also apply to rubber straps, I had to replace the rubber on my Formula One because the clasp dug into my wrist so much that I couldn't wear it at all in the end (see here for the full story).

Which leaves leather/aligator, which I don't have much experience of to be honest, apart from the odd occasions when I've tried on Carreras and Monacos. I'm not a fan of leather straps, albeit I concede that the Monaco doesn't really look right on anything else, but I'm hard pushed to decide which of these looks the worst... 

CW2111.FC6172   CAW2114.FT6021   WW2110.FT6005

In contrast this Monaco looks great with it's leather strap with colour highlight stitching...

CAW2117.FC6271

In any case, if I'm to add a Monaco to my collection (as is seeming increasingly likely) then I'm going to have to get used to a leather strap of some description.

BUYING EXPERIENCE - TAG Heuer BT0702 Strap

http://tagheuerenthusiast.blogspot.co.uk/search/label/%23BT0702%20%28Strap%29

BUYING EXPERIENCE - TAG Heuer BT0704 Strap
http://tagheuerenthusiast.blogspot.co.uk/search/label/%23BT0714%20%28Strap%29

BUYING EXPERIENCE: BT0702 Strap for 2000 Series (WK1110)

As detailed in the previous post, I really struggled with the bracelet on my 2000 Series WK1110 and decided to purchase a rubber strap. As with everything these days, my first port of call was the internet and with some difficulty I managed to find some available at widely varying prices (£90 - £300), though whether they were all genuine TAG Heuer products is open to question.

In the end I elected to buy from an AD and rang Goldsmiths in Leicester. The price was £140, but at least I knew I wasn't buying some Chinese knock off that was going to give me a rash up to my elbow. A few weeks later I received a call and went to pick up my strap. The guy in the shop took my watch away and then came back with it on the most hideous strap I've ever seen in my life and one which clearly did not belong on the WK1110, nor did it fit. Not only that but the strap was covered in a sort of white powder which I presume was where the strap had reacted with something, or was just so old that it was oxidizing.

Frankly, while it was a little bit annoying that they had ordered in a BT0207 strap rather than a BT0702 by mistake, it was far more annoying that the guy thought it looked fine and that he was happy to present a strap in such a poor state to me and charge me £140 for it. In the event I didn't need to address the issue of the condition, because it was the wrong strap anyway. He didn't look too happy when I told him that either!

Thankfully when the correct strap did finally arrive it was without blemish and fitted perfectly and looked fantastic. Sure it was expensive, but the branding on both pieces of the strap and the clasp really made it look the business.